Search results for "Active laser medium"
showing 10 items of 18 documents
Temporal Control of Pulses from a High-Repetition-Rate Tunable Ti:Sapphire Laser by Active Q-switching
2003
We investigated the lasing characteristics of a Ti:sapphire laser pumped by a pulsed high-repetition-rate Nd:YAG laser. The pump laser has a pulsewidth of 450 ns, while the Ti:sapphire laser shows a significantly shorter pulse width of 25 ns for suitably intense pumping. The energy conversion efficiency of the laser is more than 10%. To synchronize different lasers and to avoid multiple spiking during one pump pulse, we use a Brewster-cut Pockels cell in the resonator for Q-switching. The temporal profile and conversion efficiency are determined and compared to theoretical estimates.
Low repetition rate gain-switched double-clad thulium-doped fiber laser operating in the 2 µm wavelength region
2021
Abstract The experimental demonstration of a gain-switched pulsed fiber laser with low repetition rate emission in the 2 µm wavelength region is presented. The laser cavity is based on the figure-9 shape, where the gain-switched operation of the laser is obtained by using a double-clad Tm-doped fiber (DCTDF) as gain medium and a commercial pulsed laser diode at 793-nm with configurable parameters as pump source. The pulse parameters of the pump source are optimized for efficient suppressing of unstable gain-switched laser oscillations. As a result, laser pulses with low repetition rate in a range from 10 to 20 kHz with laser emission at the wavelength of 1951 nm are obtained. The generated …
Surface plasmon-polariton amplifiers
2012
Propagation of surface plasmons at metal surfaces is receiving much interest nowadays because of its broad range of potential applications, like subwavelength photonics or biosensing. Although plasmonic devices achieve unique properties, surface plasmons suffer from high attenuation because of the absorption losses in the metal. This limitation can be overcome by providing the material adjacent to the metal with optical gain. Under these conditions, absorption losses are compensated and the propagation length of the plasmon is significantly increased. In this work, a review of plasmonic amplifiers is presented. To this end, the state of the art of such devices and the propagation characteri…
A Series of Ultra-Efficient Blue Borane Fluorophores
2020
13 pags., 14 figs., 5 tabs.
Solution processable piperazine and triphenyl moiety containing non-symmetric bis-styryl-DWK type molecular glasses with light-emitting and amplified…
2018
A series of 2,6-bis-styryl-4H-pyran-4-ylidene fragment containing glassy organic compounds with chemically stable bonding of amorphous phase promoting bulky triphenyl moieties through piperazine structural fragment (DWK-T dyes) in a form of 2-(5,5,5-triphenylpentyl)piperazin-1-yl)styryl)-substituent have been synthesized and investigated as the potential gain medium component for organic solid state laser applications. Physical properties of the dyes vary and are mostly depending from the other styryl-substituent attached to the 4H-pyran-4-ylidene backbone fragment in 6-position. Thermal stability of synthesized dyes is above 312°C with the glass transitions from 97°C to 109°C. Obtained nea…
Demonstration of an efficient pumping scheme for a 7.36-nm Ni-like samarium soft x-ray laser
2010
The demonstration of a 7.36 nm Ni-like Sm soft x-ray laser pumped by 36 J of a Nd:glass chirped pulse amplification laser is presented. Double-pulse single-beam non-normal incidence pumping was applied for the efficient soft x-ray laser generation. Here the applied technique included a new single optic focusing geometry for large beam diameters, a single-pass grating compressor traveling-wave tuning capability and an optimized high energy laser double-pulse. This scheme has the potential for even shorter wavelength soft x-ray laser pumping.
A distributed model for continuous-wave erbium-doped fiber laser
2011
Abstract A distributed model of a continuous-wave erbium-doped fiber laser is discussed. The model is based on two contra-propagated traveling laser waves, and includes inhomogeneous pumping, excited state absorption at the pump and the laser wavelengths, amplified spontaneous emission and radial distribution of populations of erbium levels. It is shown that excited state absorption is a main limiting factor to the laser's efficiency. Moreover, consideration of radial distributions of erbium levels' populations in the model reduces laser efficiency and decreases optimal reflection of the laser output coupler. The modeling results are in excellent agreement with the experimental study on the…
High-efficiency Q-switched erbium fiber laser using a Bragg grating-based modulator
2002
Abstract In this work we analyze the behavior of an erbium-doped fiber laser which is based on a simple scheme. Excitation of the active medium is performed in the 980 nm pump band with a CW semiconductor laser source. Two fiber Bragg gratings acting as mirrors of the Fabry–Perot laser cavity were used. One of these gratings was mounted over a piezoelectric (PZT) element. By applying voltage pulses to the piezoelectric, the laser cavity was temporally modulated and Q-switched laser pulses up to 530 mW peak powers at 3 kHz were obtained. Typical laser emission of 2–3 μs temporal widths and 0.1 nm of optical bandwidth have been achieved when the system was operated at 18.5 kHz repetition rate…
Cladding-Pumped Erbium/Ytterbium Co-Doped Fiber Amplifier for C-Band Operation in Optical Networks
2021
Space-division multiplexing (SDM) attracts attention to cladding-pumped optical amplifiers, but they suffer from a low pump power conversion efficiency. To address this issue, ytterbium (Yb3+) and erbium (Er3+) co-doping is considered as an effective approach. However, it changes the gain profile of Er3+-doped fiber amplifiers and induces the gain difference between optical wavelengths in the C-band, significantly limiting the effective band of the dense wavelength-division multiplexed (DWDM) system. This paper is devoted to a detailed study of a cladding-pumped Er3+/Yb3+ co-doped fiber amplifier (EYDFA) through numerical simulations aiming to identify a configuration, before assembling a s…
Performance of a high repetition pulse rate laser system for in-gas-jet laser ionization studies with the Leuven laser ion source @ LISOL
2012
The Leuven Isotope Separator On-Line (LISOL) facility at the Cyclotron Research Center (CRC) Louvain-la-Neuve; The laser ionization efficiency of the Leuven gas cell-based laser ion source was investigated under on- and off-line conditions using two distinctly different laser setups: a low-repetition rate dye laser system and a high-repetition rate Ti:sapphire laser system. A systematic study of the ion signal dependence on repetition rate and laser pulse energy was performed in off-line tests using stable cobalt and copper isotopes. These studies also included in-gas-jet laser spectroscopy measurements on the hyperfine structure of 63Cu. A final run under on-line conditions in which the ra…